| Sign In | Join Free | My fazendomedia.com |
|
Brand Name : ANYO
Model Number : 32.768
Place of Origin : CHINA
MOQ : 10000pcs
Price : Negotiation
Payment Terms : L/C, T/T
Supply Ability : 50000pcs per day
Delivery Time : 8-10 work days
Packaging Details : Customized carton
Other name : Crystal oscillator
Nominal frequency : 32.768KHz
Oscillation mode : Fundamental
Cutting mode : X +2° cut
Measurement instrument : S&A 250B
Operating temperature : -20~+70℃
32.768KHz DIP cylinder type tuning fork quartz crystal resonators
Operation condition:
| Item | Symbol | Min. | TYP. | Max. | Unit |
| Operating temperature range | Topt | -20 | 70 | ℃ | |
| Storage temperature range | Tstg | -40 | 85 | ℃ | |
| Load capacitance | CL | 12.5 | pF | ||
| Drive level | DL | 0.1 | uW |
Frequency stability:
| Item | Symbol | Min. | TYP | Max. | Unit | Condition |
| Tolerance | dF/Fo | -10 | 10 | ppm | Refer to center frequency@25±3℃ | |
| Stability over temperature | dF/F25 | -0.034 | ppm/℃2 | Refer to operating temperature | ||
| Aging | dF/F25 | -5 | 5 | ppm | Per year |
dF/Fo: Frequency deviation refer to center frequency
dF/F25: Frequency deciation refer to 25℃ frequency
Electrical performance:
| Item | Symbol | Min. | TYP | Max. | Unit | Condition |
| Equivalent series resistance | ESR | 40 | KΩ | @series | ||
| Shut capacitance | C0 | 1.4 | 3 | pF | ||
| Insulation resistance | IR | 500 | MΩ | @DC 100V |
Reliability specification:
| Test items | Test method and condition | Requirements |
| Virbration | (1)Vibration Frequency 10 to 55Hz (2)Vibration Amplitude 1.5mm (3) Cycle Time 1-2min(10-55-10Hz) (4)Direction X.Y.Z (5)Duration 2h/each direction | Frequency Change:±5ppm Max. Resistance Change: 5kohm Max. |
| Shock | 3 Times free drop from 75cm height to hard wooden board of thickness more than 30mm | Frequency Change:±5ppm Max. Resistance Change: 5kohm Max. |
| Hermetic seal | Helium leak detector Checked:before the molded crystal uints | less than 1 × 10 EXP(–7) mbar.l/sec. |
| Solder ability | Dip the leads of crystal units into the solution (7-10%) of rosin 3±0.5s,then dip it into the tank 5-10s. Temperature of solder melted tank is 245°C±5℃ | The dipped surface of the leads should be at least 95% covered with continuous new solder coating |
| High temperature | 96 hours at +100℃±2℃ After 1-2hours past at room temperature from following | Frequency Change:±5ppm Max. Resistance Change: 5kohm Max. |
| Low temperature | 72 hours at -40℃±2℃ After 1-2hours past at room temperature from following test. | Frequency Change:±5ppm Max. Resistance Change: 5kohm Max. |
| Humidity | 96 hours at +40℃±2℃,relative humidity 90-95% After 1-2hours past at room temperature from following | Frequency Change:±5ppm Max. Resistance Change: 5kohm Max. |
| Temperature cycle | After supplying the following temperature cycle (50cycles)
| Frequency Change:±5ppm Max. Resistance Change: 5kohm Max. |
| Salt spray test | On the basis of GB/T10125-1997 | Frequency Change:±5ppm Max. Resistance Change: 5kohm Max. |
| Lead strength | In the lead 2.00 Kg tensile force was applied at the end to keep more than 5 seconds | Frequency Change:±5ppm Max. Resistance Change: 5kohm Max. |
Dimension:(mm)

|
|
ANYO Passive Electronic Components DIP Cylinder Type Tuning Fork Quartz Crystal Resonator Images |